Jura Capresso Coffeemaker Xf70 User Manual

IMPRESSA X  
F
70  
Short operating instructions  
 
First use  
Insert filter (first use)  
Press power switch (I) (on rear)  
Fill bean tank  
Remove water tank and empty it  
(1)  
Flip up cartridge (1) holder  
Touch symbol  
Insert filter cartridge (2) into water tank, applying slight  
pressure  
(2)  
Close cartridge holder (1) (engages audibly)  
Fill water tank and insert  
Display text:  
SPRACHE - DEUTSCH  
Turn the Rotary Switch until the required language is displayed  
Confirm selected language by pressing the Rotary Switch  
Lift out water tank  
Hold Rotary Switch down until the display shows  
Confirm setting by pressing the Rotary Switch  
FILTER  
Fill water tank and place back into the machine  
Display text:  
OPEN TAP  
Place a receptacle (ca. 1 litre) under the hot water nozzle  
Turn Rotary Switch until the display shows  
YES  
Turn tap to position  
Confirm setting by pressing the Rotary Switch  
Turn it back to the initial position when display prompts you to  
do so  
Display text:  
PRESS - MAINT.  
Place receptacle under height-adjustable coffee spout  
Touch symbol when display prompts you to do so  
Place a receptacle (ca. 1 litre) under the hot water nozzle  
Turn tap to position  
Turn it back to the initial position when display prompts you to  
do so  
The machine is ready for use  
The machine is ready for use  
 
Cleaning (duration: approx. 15 minutes)  
Changing the filter  
Display text:  
Display text:  
READY - CLEAN  
READY - FILTER  
Touch the maintenance symbol  
until the display shows  
NOTE:  
After having used 50 litres of water or after two months at the  
latest, the filter cartridge will be used up.  
EMPTY - TRAY  
Empty drip and grounds tray and place back into the machine  
Remove drip tray  
Touch symbol  
to switch machine off  
until the display shows  
Place a receptacle (ca. 1 litre) under the coffee spout  
Touch the maintenance symbol  
Touch maintenance symbol  
CHG FILTER - OPEN TAP  
Drop an original JURA cleaning tablet into the filler funnel for  
ground coffee when display prompts you to do so  
Close lid  
Remove and empty water tank  
(1)  
Flip up cartridge holder (1)  
Remove old CLARIS plus filter cartridge from the tank  
Place new filter cartridge (2) into water tank, applying slight  
pressure  
(2)  
Touch the maintenance symbol  
Close cartridge holder (1) (engages audibly)  
Empty drip and grounds tray and place back into machine when  
display prompts you to do so  
Fill water tank and place back into machine  
Place a receptacle (ca. 1 litre) under the hot water nozzle  
Turn tap to position  
Wipe out filler funnel for ground coffee with a dry cloth after  
the cleaning program has finished.  
Turn it back to the initial position when display prompts you to  
do so  
The machine is ready for use  
The machine is ready for use  
 
Decalcifying (duration: approx. 40 minutes)  
Decalcifying (continuation)  
Empty drip and grounds tray and place back into machine when  
Display text:  
READY - DECALCIFY  
display prompts you to do so  
Touch symbol  
to switch machine off  
Rinse water tank well, fill with cold, fresh tap water and place it  
back into the machine  
Place receptacle under spout  
Touch maintenance symbol  
until the display shows  
Turn tap to position  
EMPTY - TRAY  
Turn it back to the initial position when display prompts you to do  
so  
Empty drip and grounds tray and place back into machine  
Remove 2-stage frothing jet or hot water nozzle  
Empty drip and grounds tray and place back into machine when  
display prompts you to do so  
Remove water tank and empty it  
Completely dissolve contents of a blister (3 tablets) in 0.6 litres  
of water  
Fit 2-stage frothing jet or hot water nozzle  
Pour solution into the empty water tank  
Place water tank back into machine  
Shift receptacle under height-adjustable coffee spout  
Place a receptacle (ca. 1 litre) under the spout  
Touch maintenance symbol  
do so  
when display prompts you to  
Turn tap to position  
Turn it back to the initial position when display prompts you to  
do so  
The machine is ready for use  
 
Cleaning the 2-stage frothing jet  
Notes  
TIP:  
To ensure perfect operation of the 2-stage frothing jet, we  
recommend you clean it regularly.  
Hold the nozzle at the top and at the bottom end or use a 7 mm  
open-ended spanner  
Screw the nozzle apart  
Thoroughly rinse the 3 parts under running water  
NOTE:  
The display will not prompt you to clean the 2-stage frothing jet  
 

Insignia Flat Panel Television NS F14TV User Manual
Intel Computer Hardware 5400 Series User Manual
Intermec Printer PB3 User Manual
Inter Tel Cordless Telephone INT1400 User Manual
JBL Speaker System CREATURE SELF POWERED SATELLITE SPEAKERS AND SUBWOOFER User Manual
JVC Digital Camera GR D870U User Manual
Kenwood Car Video System KVT 829DVD User Manual
Kenwood GPS Receiver KNA DV2100 User Manual
Keys Fitness Home Gym KF FB User Manual
Kolcraft Stroller S64 R2 User Manual