JVC Car Video System GD 463D10E User Manual

Contents  
GD-463D10U  
GD-463D10E  
3D LCD MONITOR  
z Safety Precautions............................ 1  
First things first!  
INSTRUCTIONS  
z Remote control.................................. 6  
z Names and functions of parts ........... 7  
z Getting started................................... 9  
Getting started  
z Viewing 3D images ......................... 11  
z Watching videos / DVDs ................. 13  
Let’s try it out  
Try the advanced features  
z Useful functions .............................. 14  
z Configuring your remote control...... 15  
z Customising your monitor ............... 17  
Picture............................................ 17  
Features (sub menu)...................... 18  
Sound............................................. 19  
Features......................................... 20  
Set Up............................................ 21  
Just the way you like it  
When you have trouble  
z Troubleshooting .............................. 23  
z Technical information ...................... 25  
z Specifications.................................. 26  
LCT2574-001A-H  
 
z Do not install this product in the following places:  
– in a damp or dusty room  
– where the product is exposed to soot or steam, such as near the  
cooking counter or a humidifier  
z Slots and openings in the cabinet are provided for ventilation. These  
ensure reliable operation of the product and protect it from overheating.  
These openings must not be blocked or covered.  
z Never push objects of any kind into this product through openings as  
they may touch dangerous voltage points or short-circuit the parts,  
which could result in a fire or electric shock.  
z Never spill liquid of any kind on the product.  
z Never place anything on the product. (Placing liquids, naked flames,  
cloths, paper, etc. on the product may cause a fire.)  
– near heat sources  
– where condensation easily occurs, such as near the window  
z Do not place this product on an unstable cart, stand, or table. The  
product may fall, causing serious injury to a child or adult, and serious  
damage to the product.  
The product should be mounted according to the manufacturer’s  
instructions, and should use a mount recommended by the  
manufacturer.  
z Do not apply any strong shock to the LCD panel. (Do not hit any object  
against it or push it with a sharp-pointed tool.)  
z Do not put heavy objects on the product.  
z Do not step on or hang on the product.  
z Do not use this product near water.  
z Be sure to install the product in the place where proper temperature and  
humidity are kept (See “Operating conditions” on page 26).  
This product becomes hot during its use. Take enough care when  
handling the product.  
U.S.A. only  
FCC NOTICE (U.S.A. only)  
CAUTION:  
Changes or modifications not approved by JVC could void the user’s  
authority to operate the equipment.  
Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltages and other hazards. Refer  
all service to qualified service personnel.  
NOTE:  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
z Do not use the product for a long time if the sound is distorted.  
z Never listen to headphones at high volume, it may damage your  
hearing.  
z Make enough room for inserting or removing the power plug. Place the  
product as close to an AC outlet as possible. The main power supply for  
the product is controlled by inserting or removing the power plug.  
z When the product is left unattended and unused for a long period of  
time, unplug it from the wall outlet and disconnect the cable system.  
z Do not overload wall outlets, extension cords, or convenience  
receptacles on other equipment as this can result in a risk of fire or  
electric shock.  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
 
2
Safety Precautions  
3
U.S.A. only  
14)Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15)Apparatus shall not be exposed to dripping or splashing and no objects  
filled with liquids, such as vases, shall be placed on the apparatus.  
16)Batteries shall not be exposed to excessive heat such as sunshine, fire or  
the like.  
IMPORTANT RECYCLING INFORMATION  
This product has a fluorescent lamp that contains mercury. Disposal of  
these materials may be regulated in your community due to environmental  
considerations. For disposal or recycling information, please contact your  
local authorities or for USA, the Electronic Industries Alliance:  
17)When discarding batteries, environmental problems must be considered  
and the local rules or laws governing the disposal of these batteries must  
be followed strictly.  
18)Avoid improper installation and never position the unit where good  
ventilation is impossible. When installing this monitor, distance  
recommendations must be maintained between the set and the wall, as  
well as inside a tightly enclosed area or piece of furniture. Keep to the  
minimum distance guidelines shown for safe operation.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
200 (7 7/8)  
8) Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
150 (6)  
50 (2)  
Unit: mm (inch)  
150 (6) 50 (2)  
19)When this monitor is connected to the wall outlet, it is always on standby  
even when all the LED lamps are not lit. To shut down the monitor, unplug  
the monitor from the wall outlet.  
10)Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12)Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/ apparatus combination to avoid injury  
from tip-over.  
13)Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
 
European Union only  
Dear Customer,  
This apparatus is in conformance with the valid European directives and  
standards regarding electromagnetic compatibility and electrical safety.  
Information for Users on Disposal of Old Equipment  
and Batteries  
[European Union]  
European representative of Victor Company of Japan, Limited is:  
These symbols indicate that the electrical and electronic equipment  
and the battery with this symbol should not be disposed of as  
general household waste at its end-of-life. Instead, the products  
should be handed over to the applicable collection points for the  
recycling of electrical and electronic equipment as well as batteries  
for proper treatment, recovery and recycling in accordance with your  
national legislation and the Directive 2002/96/EC and 2006/66/EC.  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
61145 Friedberg  
Germany  
By disposing of these products correctly, you will help to conserve  
natural resources and will help to prevent potential negative effects  
Products  
on the environment and human health which could otherwise be  
caused by inappropriate waste handling of these products.  
For more information about collection points and recycling of these  
products, please contact your local municipal office, your household  
waste disposal service or the shop where you purchased the product.  
Penalties may be applicable for incorrect disposal of this waste, in  
accordance with national legislation.  
[Business users]  
If you wish to dispose of this product, please visit our web page  
Battery  
the product.  
Notice:  
[Other Countries outside the European Union]  
These symbols are only valid in the European Union.  
If you wish to dispose of these items, please do so in accordance  
with applicable national legislation or other rules in your country for  
the treatment of old electrical and electronic equipment and batteries.  
The sign Pb below  
the symbol for  
batteries indicates  
that this battery  
contains lead.  
 
4
Safety Precautions  
5
Maintenance  
Unplug this product from the wall outlet before cleaning.  
Screen  
To avoid irreparable change in appearance of the screen such as uneven  
color, discoloration, scratches, be careful about the following:  
z Do not paste or stick anything using any glues or adhesive tapes.  
z Do not write anything on the screen.  
z Do not strike the screen with a hard object.  
z Avoid condensation on the screen.  
z Do not wipe the screen with any liquid such as water. In addition, wiping  
the screen with water-diluted neutral detergent or solvent such as alcohol,  
thinner, or bezine may affect the anti-reflection treatment of the screen.  
z Do not wipe the screen forcefully.  
If the screen gets stained, wipe it with a soft dry cloth.  
Cabinet  
To avoid the deterioration or damages of the cabinet such as its paint's  
peeling away, be careful about the following:  
z Do not wipe the cabinet using solvent such as alcohol, thinner, or benzine.  
z Do not expose the cabinet to any volatile substance such as insecticides.  
z Do not allow any rubber or plastic in contact for a long time.  
z Do not wipe the cabinet forcefully.  
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily  
stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and  
wrung well, then wipe with a soft dry cloth.  
See “Handling the glossy finish of the monitor” (P. 8) on how to handle the  
glossy finish.  
Ventilation openings  
Use a vacuum cleaner to get rid of the dust around the intakes (all the  
openings). If a vacuum cleaner is not available, use a cloth and wipe it off.  
Leaving the dust around the intakes may prevent proper temperature control  
and cause damage to the product.  
Glasses  
If the glasses get stained, wipe it with a soft dry cloth.  
 
Remote control  
Mute  
Turn on / off (standby) the monitor  
Enter number  
2%452. ꢁ  
#LEAR 3$  
Turn on “Clear SD” (P. 18)  
Color buttons  
Display on-screen menu (P. 17)  
Switch between “TV / STB / DVD / AUDIO” (P. 15)  
Switch between VIDEO devices  
Select and confirm settings in menus  
CH  
46ꢀ6)$%/  
Change external input  
To the previous screen  
Volume control / Turn off muting  
Display current input information  
TOP MENU  
CH  
MODE  
$)30,!9  
ZOOM  
Change the aspect ratio (P. 14)  
Turn on “Sound Effect” (P. 14)  
Select a 3D mode (P. 12)  
Select a picture mode (P. 14)  
Note  
z If the remote control doesn’t  
work, confirm that the mode is  
set to “TV”.  
LCD  
z For buttons that can be used to operate other devices, refer to  
“Configuring your remote control” (P. 15).  
z Buttons that are not explained in this manual does not function  
with this monitor.  
 
6
   
7
Names and functions of parts  
Touch sensor panel operation  
Change external  
input.  
Volume  
Turn on / off (standby)  
the monitor.  
Remote control  
sensor  
Power lamp  
ON: Lit (Blue)  
OFF: Unlit  
z When “Power Lamp” is set to “Off”,  
the power lamp will not light up.  
g“Power Lamp” (P. 20)  
Menu operation.  
Switch to an external input. (P. 13)  
z Touching  
and  
simultaneously switches the  
monitor to 3D mode.  
Touch on the function name to operate the function  
Note  
z You will hear a beep if you have touched  
the button correctly.  
Peel off the protection films pasted on the glossy finish of the monitor after  
the monitor has been placed properly. (P. 8)  
VOL  
Change the direction of monitor  
Operate the menus  
Use as “MENU” button or “OK” button.  
CH  
Use as “ ” and “ ” buttons.  
VOL  
Use as “ ” and “ ” buttons.  
z For details on menu operations, refer to “Customising your monitor”  
(P. 17).  
 
     
Note  
Attach the stand to the monitor  
z When the stand is not used:  
1
Seal up the two holes at the bottom of the TV using  
the plates provided. Peel off the protection films on  
the plates. Then peel the plates from the paper and  
stick them on the holes.  
Handling the glossy finish of the monitor  
Be careful when handling the glossy finish of the monitor  
The glossy finish of the monitor scratches easily.  
z Protection films have been pasted onto the glossy finish of the monitor to  
prevent scratches. Peel off the films after the monitor has been placed  
properly.  
z If the glossy finish gets dirty, clear the dust off the glossy finish first. Then  
wipe softly with the cleaning cloth provided. If you do not clear the dust  
first, or you wipe the glossy finish too hard, or a cleaning cloth other than  
the one provided is used, the glossy finish may be scratched.  
To prevent scratches on the panel, lay a piece of soft cloth on an even  
platform and place the monitor onto it.  
2
Glossy finish  
 
8
     
9
Getting started  
Please read P. 10 of this manual to set up your monitor.  
Check accessories  
Install your monitor  
Remote control  
Follow the instructions on page 8 to attach the stand provided to the monitor.  
z Place the monitor on a flat and stable location.  
Power requirements  
“AAA/R03” Batteries  
(For confirming the  
monitor works)  
z Connect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.  
Cleaning cloth  
(For details on using the  
cleaning cloth, see P. 8.)  
Installation requirements  
z To prevent the monitor from falling, thread the belt through the hole on the  
back of the stand and secure it to the rack, etc.  
Batteries shall not be exposed to  
excessive heat such as direct  
sunshine, fire or the like.  
Hole  
Circularpolarizing glasses  
(x2)  
(For viewing 3D images)  
z Stand, stand cover, screws and plates are also included. For details, refer  
to page 8.  
Belt and screw (not provided)  
Insert the batteries  
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end,  
making sure the + and - polarities are correct.  
 
   
Watching videos  
VIDEO-1  
Connecting your external devices  
Output j  
Input h  
Composite signal /  
Component signal  
(P. 27)  
Make sure all the devices and the monitor are turned off.  
You can connect many different devices to the rear panel of the monitor.  
Please read the user manuals of each device before setting up.  
(Connecting cables are not supplied with this monitor.)  
Sound L / R  
z
Use component signal  
g “VIDEO Setting” (P. 21)  
g: signal direction  
Component input  
Composite input  
Watching videos  
VIDEO-2  
Output j  
Input h  
Composite signal /  
S-VIDEO  
Headphones  
Sound L / R  
z
If both composite and S-VIDEO cables  
are connected, S-VIDEO input takes  
priority over composite inputs.  
HDMIConnector  
HDMI-1 HDMI-2 HDMI-3  
Game  
Video  
consoles camera  
HDMI-1  
HDMI-2  
HDMI-3  
B
Connecting HDMI  
devices  
DVD Player  
A
VCR  
Not available.  
(For service adjustments)  
C
Output j  
Input h  
HDMI signal (P. 27)  
z
z
“HDMI-1 Audio Setting” g (P. 21)  
HDMI-2 and HDMI-3 inputs do not support  
analog sound.  
HD Video  
camera  
HDMI-1  
Pb  
L
Pr  
R
Y
V
Digital Satellite  
OUTPUT  
L
broadcast tuner  
Video and sound signals of a monitor channel  
you are viewing output from these terminals  
DVD player  
R
R
L
L
V
R
Output j  
Composite signal  
Sound L / R  
DVD player  
(HDMI compatible)  
Video  
camera  
Game  
consoles  
S-VIDEO  
V
OUTPUT  
To VIDEO-2  
DVI devices  
g“Connect DVI devices”  
(P. 25)  
PC input line in  
PC AUDIO  
PC IN  
(D-SUB)  
PC  
HDMI, the HDMI Logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
Note  
z To reduce noise, use a VGA cable with core filters.  
 
10  
 
11  
Viewing 3D images  
This product is a 3D LCD Monitor which adopts the Xpol®*1 circular polarizing  
method. You can enjoy 3D stereoscopic content by using the supplied  
circular polarizing glasses.  
When viewing in 3D  
z To view in 3D, input the 3D images and press the “3D” button to change to  
a suitable mode before putting on the circular polarizing glasses to view  
the 3D images.  
*1: Xpol® is a registered trademark of Arisawa Manufacturing Co., Ltd.  
z Every individual will have a different experience when viewing 3D images.  
Viewing at a close distance may cause disorders and discomfort; it is  
recommended to view at a distance of about 2 m (6 feet) from the front of  
the screen.  
z The 3D effects may differ when viewing the screen from different angles.  
z Stop using the product and rest immediately if you experience eyestrain,  
dizziness, vomiting, headaches or any other discomforts. Take periodic  
breaks and rest even if you do not experience any discomfort.  
z If the symptoms persist even after resting, please consult a doctor.  
z For users with past experiences of PSS (Photo Sensitive Seizure) or users  
with heart problems, please consult a doctor before using this monitor.  
z For infants still in the visual development stage, please consult a doctor  
and have an adult guardian accompany the child.  
Basic 3D principle  
By having a filter of different polarization on every alternate scan line on the  
monitor, and projecting the left eye image (left circular polarization) and the  
right eye image (right circular polarization) through the filters, users can  
enjoy a realistic three dimensional view by viewing the left and right images  
simultaneously through the circular polarizing glasses.  
As the left and right images are always displayed together on the screen,  
users can view flicker-free 3D images.  
Cautions on using the circular polarizing glasses  
z Use the circular polarizing glasses only when viewing 3D images.  
z Use only the circular polarizing glasses provided.  
z For users who wear spectacles, cover the spectacles with the circular  
polarizing glasses.  
z Do not use the circular polarizing glasses as sunglasses.  
z Please consult a doctor if allergies appear on the areas that come into  
contact with the circular polarizing glasses.  
Note  
z For purchase of additional circular polarizing glasses, please contact the  
dealer where you purchased your monitor.  
 
 
To view 3D images  
This monitor supports LINE BY LINE and SIDE BY SIDE 3D signals. To view  
3D images, input a compatible 3D signal to enjoy the 3D effects.  
For non-compressed side-by-side  
3D input  
SIDE BY SIDE 2  
You can activate the 3D mode using the following method.  
Touch  
and  
on the touch sensor panel (P. 7)  
simultaneously.  
OR  
Press the “3D” button on remote control. (P. 6)  
Left screen  
Right screen  
Monitor screen  
SIDE BY SIDE 1  
SIDE BY SIDE 2  
LINE BY LINE  
Input signal  
For line-by-line 3D input and normal  
2D input.  
LINE BY LINE  
Note  
z 2D to 3D image conversion function is not available.  
z When using SIDE BY SIDE to view 3D images, screen displays such as  
menu screen will appear either on the left or right side of the screen. If you  
cannot see the screen clearly, remove your circular polarizing glasses.  
z Set the 3D/ZOOM mode to the following setting when viewing in 3D.  
Input  
HDMI  
Format  
1080p  
3D Mode  
Zoom Mode (P. 14)  
LINE BY LINE,  
SIDE BY SIDE 1/2  
Full Native  
Input signal  
Monitor screen  
HDMI,  
Component  
1080i  
SIDE BY SIDE 1/2  
Full Native  
For horizontally compressed side-  
by-side 3D input.  
z If double vision occurs when viewing in 3D using the component inputs,  
set the following items.  
“Sharpness”: Minimum (P. 17)  
SIDE BY SIDE 1  
“Clear SD”, “Digital VNR”, “DigiPure”, “MPEG Noise Reduction”: “Off”  
(P. 18)  
Left screen  
Right screen  
Monitor screen  
Input signal  
 
12  
   
13  
Watching videos / DVDs  
1 Select the video source  
AV Select  
AV Select  
A select  
B watch  
1
2
3
4
5
6
VIDEO-1  
VIDEO-2  
HDMI1  
HDMI2  
HDMI3  
PC  
TV/VIDEO  
E.g. For VIDEO-1  
2
Operate the connected device and play a video  
To operate using the monitor’s touch sensor panel  
TV/VIDEO  
1 Touch  
2 Touch  
3 Touch  
and  
to select  
LCD  
 
     
Useful functions  
Zoom  
Sound Effect  
Change the aspect ratio  
Enjoy the sound setting that you like  
1
Sound Effect  
Cinema Surround  
MaxxBass  
Off  
Off  
2 Select the aspect ratio  
Zoom  
A select  
Auto  
Regular  
Panoramic  
Cinema Surround (P. 19)  
Enjoy ambient sound.  
Panoramic  
14:9 Zoom  
16:9 Zoom  
16:9 Zoom Subtitle  
Full  
z “Cinema Surround” does not work with headphones.  
B set  
Full Native  
Slim  
Panoramic Zoom  
MaxxBass (P. 19)  
Compensates low frequencies to widen the frequency band.  
z “MaxxBass” does not work with headphones.  
CH  
3
16:9 Zoom  
Move the picture with S or T while this bar is displayed  
Picture Mode (P. 17)  
z When “Slim” is selected, a 4:3 image stretched out to 16:9 will  
revert back to its original aspect ratio with black bands.  
z When “Panoramic Zoom” is selected, a 4:3 image with black  
bands will be stretched out to 16:9.  
CH  
You can select a preset picture setting according to the  
brightness of your room or when playing video games.  
z “Full Native” g “What is “Full Native”?” (P. 25)  
z Using “Auto” g “Auto in “Zoom”” (P. 25)  
Note  
z Depending on the signal formats, some zoom modes will be  
displayed in black and will not be selectable.  
z If an image is displayed in an aspect ratio that differs from its  
original aspect ratio, the image will be distorted or portions of  
the image will be cut off.  
LCD  
 
14  
           
15  
Configuring your remote control  
You can configure your monitor’s remote control to operate your  
4 Set the remote control code.  
other devices.  
Configure your remote control.  
1 Turn on the device manually.  
Release the button  
Press and hold  
Enter four digit  
number  
2 Switch the remote control mode to a mode that  
matches your device. Refer to the table below to  
select an appropriate mode.  
5 Point the remote control at your device, press  
and confirm that your device is turned off. If your  
device does not respond, try entering another  
available code.  
TV  
STB  
DVD  
AUDIO  
Note  
z The indicator lights for 3 seconds each time the remote  
control is operated.  
z If none of the code works, refer to “Using the search code  
function” (P. 16).  
3 Find the remote control code for your JVC device  
from the table below.  
MODE Applicable devices  
TV This monitor only  
Remote control codes  
STB Not in use  
DVD  
0503, 0539, 0623, 1241, 1550,  
1602, 1701, 1860, 1863, 1940  
DVD  
DVD/DVD-R  
1164, 1275, 1597  
Home Theater in Box 0623, 1701, 1860, 1863, 1940  
Receiver/Home  
Theater in Box  
0074,1374,1676, 2000, 2001  
AUDIO  
LCD  
 
     
Button functions  
Using the search code function  
Change the remote control mode  
This function searches through the codes one by one, beginning from the  
first code in the list.  
1 Turn on the device manually.  
Turn on/off the device  
Navigate the menus  
2 Switch the remote control mode to a mode that matches  
your device.  
Select  
OK  
Display menu  
Press  
to select the mode.  
DISPLAY  
Back to  
previous menu  
Display top  
menu  
3 Activate the search code function.  
Hold down and until the mode indicator blinks.  
Playback / Record, etc.  
Play  
4 Point the remote control at your device and press  
. If  
Select a  
chapter  
MODE  
TOP MENU  
DISPLAY  
there is no response, try the next code by pressing and  
Forward  
Rewind  
press  
again. Repeat the process until your device  
MODE  
turns off.  
Stop  
Pause  
5 Press  
to register the code.  
The code is now set. Confirm that the mode indicator goes  
out.  
Record  
Mute g Press “  
Volume g Press “  
If your monitor’s remote control still does not work even after using the  
search code function, use your device’s own remote control. Some  
models of JVC devices cannot be operated with this remote control.  
Select a surround mode g Press “  
z Depending on your device, some functions may not  
be operable with this remote control.  
LCD  
 
16  
 
17  
Customising your monitor  
1 Display the menu bar  
Picture  
Picture  
Note  
Picture Mode  
Backlight  
Contrast  
Brightness  
Sharpness  
Color  
Standard  
z “Sharpness” is not  
available during HDMI  
input.  
2 Display the desired menu  
select  
Picture  
Tint  
White Balance  
Features  
Cool  
Picture Mode  
You can select a preset picture setting according to the  
brightness of your room or when playing video games.  
3 Change or adjust the setting  
z The menu disappears  
after one minute of  
inactivity.  
To the previous  
screen  
g
Picture  
Bright  
Soft  
: in a fairly bright room  
: in a dark room  
Picture Mode  
Backlight  
Contrast  
Brightness  
Sharpness  
Color  
Standard  
Tint  
Standard  
: in a room with standard brightness  
White Balance  
Features  
Cool  
Game Mode : when playing video games  
select  
You can make further adjustments to the selected preset  
“Picture Mode” to your liking.  
change / adjust  
Backlight  
Contrast  
Brightness  
Sharpness  
Color  
Backlight brightness (Darker l Brighter)  
Contrast (Lower l Higher)  
LCD  
To enter an item’s menu  
Features  
Clear SD  
Digital VNR  
DigiPure  
Pull Down  
Color Management  
Picture Management  
Smart Picture  
Dynamic Backlight  
MPEG Noise Reduction  
Color System  
select  
Off  
Off  
Off  
Auto  
On  
On  
On  
On  
On  
Brightness (Darker l Brighter)  
Sharpness (Softer l Sharper)  
Color (Lighter l Deeper)  
Note  
z Depending on the  
situation (video  
signal formats,  
(E.g. Features)  
Zoom  
external inputs,  
etc.), some items  
will be displayed in  
black color and will  
not work. You will  
not be able to  
Tint  
Tint (Reddish l Greenish) (NTSC only)  
4 Close the menu  
White Balance Color temperature (Warm / Mid / Cool)  
To return to the default adjustments g (blue)  
change their  
g “Features (sub menu)” (P. 18)  
Features  
setting as well.  
 
               
Features (sub menu)  
Make it easier to view bright / dark pictures  
(On / Off)  
Picture  
Management  
Features  
Note  
Clear SD  
Off  
Off  
Off  
Auto  
On  
On  
On  
On  
On  
Digital VNR  
z “Clear SD”, “Digital VNR”, “DigiPure”  
and “MPEG Noise Reduction” are not  
available during HDMI input.  
z “Smart Picture” is not available when  
“Picture Mode” is set to “Bright” (P. 17).  
z “Clear SD”, “Digital VNR”, “DigiPure”,  
“Pull Down”, “MPEG Noise Reduction”  
and “Color System” are not available  
when “AV Select” is set to “PC”. (P. 13)  
DigiPure  
Make it easier to view white areas (On / Off)  
Smart Picture  
Pull Down  
Color Management  
Picture Management  
Smart Picture  
Dynamic Backlight  
MPEG Noise Reduction  
Color System  
Reduce the brightness of the backlight when  
the screen is dark (On / Off)  
Dynamic Backlight  
Zoom  
Reduce MPEG video noise (On / Off)  
MPEG Noise  
Reduction  
When there is no color, change the color  
system (PAL / SECAM / NTSC3.58 /  
NTSC4.43 / Auto)  
Color System  
For clearer picture (Off / Mode-1 / Mode-2)  
Clear SD  
z When “Mode-1” or “Mode-2” is selected, “Digital VNR”, “DigiPure”,  
“MPEG Noise Reduction” and “Picture Management” settings are not  
available.  
z Select “Auto” when watching videos etc.  
Color System  
PAL  
Reduce noise  
Digital VNR  
On  
: Maintain constant effect Off  
level  
: Function is turned off  
: Function is turned off  
Select a default aspect ratio for Auto in  
“Zoom” (P. 14)  
Zoom  
For natural-looking outlines  
DigiPure  
Panoramic  
Regular  
14:9 Zoom  
On  
: When the picture loses Off  
Zoom  
Auto  
Panoramic  
sharpness  
Regular  
Panoramic  
14:9 Zoom  
16:9 Zoom  
16:9 Zoom Subtitle  
Full  
Full Native  
Slim  
Panoramic Zoom  
16 : 9  
4 : 3  
14 : 9  
For smooth cinema film  
Pull Down  
: Function is always on Off : Function is turned off  
On  
Auto : Turn on / off the function automatically  
Maintain a natural color balance (On / Off)  
Color Management  
 
18  
             
Customising your monitor  
19  
Sound  
Sound  
Bass  
Treble  
Balance  
Cinema Surround  
Auto Volume Control  
MaxxBass  
Off  
Off  
Off  
Low tones (Weaker l Stronger)  
High tones (Weaker l Stronger)  
Bass  
Treble  
Speaker balance (Left stronger l Right  
stronger)  
Balance  
Ambient sound (High / Low / Mono / Off)  
Cinema Surround  
z “Cinema Surround” does not work with headphones.  
Auto Volume  
Control  
Turns down the volume automatically when  
an excessive sound signal is input. (On / Off)  
z “Auto Volume Control” does not work with headphones.  
Compensates low frequencies to widen the  
frequency band (Low / High / Off)  
MaxxBass  
z “MaxxBass” does not work with headphones.  
MaxxBass is a registered trademark of Waves Audio Ltd. in the USA,  
Japan and other countries.  
 
       
Features  
Features  
Blue Back  
Control Lock  
Power Lamp  
On  
Off  
On  
Displays a blue screen and mutes the sound  
when the signal is weak or absent (On / Off)  
Blue Back  
z “Blue Back” does not function when the 3D mode is set to  
“SIDE BY SIDE 2”. (P. 12)  
Disable the front control buttons on the  
monitor. (On / Off)  
Control Lock  
Lights the power lamp (P. 7) while the monitor  
is on (On / Off)  
Power Lamp  
 
20  
   
Customising your monitor  
21  
Set Up  
Adjust the position of the PC image  
A select “PC Position”  
Set Up  
Video Setting  
HDMI-1 Audio Setting  
HDMI Mode Setting  
PC Setting  
PC Position  
Auto  
Note  
B enter  
z “PC Setting” is only available when  
“AV Select” is set to “PC”. (P. 13)  
A adjust  
g “Setting video terminals” (P. 22)  
VIDEO Setting  
Set to “Digital” or “Auto” for HDMI devices,  
or “Analog” or “Auto” for DVI devices. (Not  
available for HDMI-2 and HDMI-3.)  
HDMI-1 Audio  
Setting  
B set  
(blue)  
z Reset position g  
For setting the HDMI input  
If there is no picture displayed on the  
screen, set “Mode” to “1” or “2”.  
HDMI Mode Setting  
HDMI Mode Setting  
HDMI-1  
Mode  
HDMI-2  
Mode  
1
2
2
HDMI-3  
Mode  
For setting the PC input  
PC Setting  
PC Position:  
PC Setting  
PC Position  
Adjust screen position  
Phase  
Pixel  
Phase:  
Sets the focus of the screen.  
Pixel:  
Adjusts the horizontal feature of the screen.  
 
         
Switch between component and composite input  
Pr/Pb/Y, V)  
Setting video terminals  
(
1 Display the “VIDEO Setting” menu  
A Select “VIDEO-1”  
B Set to component input  
Display the menu  
bar  
Select “Set Up”  
Select “VIDEO Setting”  
VIDEO Setting  
VIDEO Setting  
select  
A select  
A select  
(yellow)  
VIDEO-1  
DVD  
VIDEO-1  
DVD  
VIDEO-2  
SAT  
VIDEO-2  
SAT  
B next  
B next  
Pr/Pb/Y  
V
2 Select an input, and then proceed with setting  
Return to composite input g Press “ ” (yellow) in B again.  
VIDEO Setting  
VIDEO-1  
DVD  
select  
VIDEO-2  
SAT  
Edit names of connected devices (ID LIST)  
A Show the name list  
B Select a name from the list  
A select  
(blue)  
B set  
Clear the name g Select the blank space in the list  
 
22  
   
23  
Troubleshooting  
Problem  
Actions  
Remote control stops z Unplug monitor, several minutes later plug it  
working  
in again.  
Aspect ratio changes  
unintentionally  
z Press “  
” to return to your settings. (P. 14)  
I can’t turn it on!  
z Is the power cord  
connected to the AC  
outlet correctly?  
PC screen alignment  
is off  
z Adjust “PC Setting”. (P. 21)  
z LCD panels use fine dots (“pixels”) to display  
images.  
While more than 99.99% of these pixels  
function properly, a very small number of  
pixels may not light, or may light all the time.  
Please understand that this is not a  
malfunction.  
Black or white dots  
appear on the screen  
The remote  
control  
z Change the “Picture Mode” setting. (P. 17)  
z Unnatural color >>>  
doesn’t work!  
z Are the batteries  
flat?  
z Are you more than 7  
meters (23 feet) away  
from the monitor?  
z Is the “MODE (TV, STB, DVD,  
AUDIO)” set to “TV”?  
Adjust “Color” and “Backlight”. (P. 17)  
Check your “Color System”. (P. 18)  
z Noise >>> Set to the following functions.  
Picture Mode: Standard (P. 17)  
Digital VNR: On (P. 18)  
LCD  
Poor picture quality  
DigiPure: Off (P. 18)  
z Dull picture >>> Set to the following  
functions.  
Picture Mode: Bright (P. 17)  
Digital VNR: Off (P. 18)  
DigiPure: On (P. 18)  
 
 
Problem  
Actions  
Problem  
Actions  
z If the top of the image is distorted, check the  
video signal quality itself.  
z If movement appears unnatural when  
receiving a signal from a DVD player etc.,  
with 576p, change the output setting of the  
external device to 576i.  
z Check if the device is compliant with HDMI.  
z Set “HDMI-1 Audio Setting” to “Digital” or  
“Auto” for HDMI devices, or “Analog” or  
“Auto” for DVI devices.  
(Not available for HDMI-2 and HDMI-3.)  
(P. 21)  
Strange picture when  
using an external  
device  
No sound  
Poor sound  
z Adjust “Bass” and “Treble”. (P. 19)  
z Wait a little for the signal to stabilize when  
switching the signal format for an HDMI  
device.  
Green and distorted  
screen  
z Audio signals received from HDMI-1, HDMI-2  
and HDMI-3 cannot be sent to the OUTPUT  
terminal.  
No sound from the  
audio component  
z Set to the 3D mode or ZOOM mode. (P. 12)  
z If the images are not displayed properly even  
after switching the 3D/ZOOM mode, the 3D  
signal may not be supported.  
Images do not appear  
as 3D or double  
vision  
z It is not a malfunction. Depending on the  
situation, some function items will be  
displayed in black color and will not work.  
(P. 17)  
Some functions do  
not work  
z Read the user manual of the connected  
device and perform the following:  
g Check if the output setting of the device is  
correct.  
g Change the signal format of the device to  
other format.  
Wrong screen size  
z Use the cable marked with HDMI logo.  
No picture, no sound  
Picture noise or no  
picture  
z Set “HDMI Mode Setting” to “1” or “2”. (P. 21)  
 
24  
25  
Technical information  
What is “Full Native”?  
PC signals that can be displayed  
z With the full HD LCD display and “Full Native”, you can enjoy full native HD  
resolution of 1920 x 1080. It exposes flaws in the video that were hidden  
when viewing on “Full”.  
640 x 480 1024 x 768  
z If the signal doesn’t  
appear, check that the  
vertical frequency on the  
PC is set to “60Hz”.  
Resolution  
(VGA)  
(XGA)  
Vertical frequency (Hz)  
60.0  
60.0  
Full  
Full Native  
Connect DVI devices  
Connect a DVI device to HDMI-1 using DVI-HDMI conversion cable. Connect  
analog sound output of the DVI device to L and R terminals in HDMI-1 (DVI  
ANALOG AUDIO).  
z Set “HDMI-1 Audio Setting” to “Analog” or “Auto” g (P. 21)  
z HDMI-2 and HDMI-3 inputs do not support analog sound (HDMI-1 (DVI  
ANALOG AUDIO)).  
* The illustrations are emphasised to make clear differences between “Full”  
and “Full Native”.  
z Dark bar or noise may appear at the edges of the screen when viewing in  
“Full Native” for some videos. This is resulted from the signal itself, not due  
to monitor malfunction.  
Auto in “Zoom”  
When “Auto” is selected in Zoom, the aspect ratio will turn to the ratio  
obtained from the information the monitor received.  
z The aspect ratio will turn to the ratio obtained from WSS (Wide Screen  
Identification Signal), video signal, or control signal of the external devices.  
Without receiving the aspect information, it will be the setting in “Zoom”.  
(P. 18)  
 
       
Specifications  
Main unit  
GD-463D10U / GD-463D10E  
Model  
Power requirements  
AC 100 V - 240 V, 50 Hz / 60 Hz  
Audio output (Rated power output) 10 W + 10 W  
Speakers  
(4.5 cm x 13 cm) x 2  
Power consumption  
[standby]  
210 W  
[0.5 W]  
Screen size (visible area size  
measured diagonally)  
116.8 cm  
Headphone jack  
Stereo mini jack (3.5 mm in diameter) x 1  
Temperature: 0°C – 40°C (32°F – 104°F)  
Operating conditions  
Relative humidity: 20% – 80% (non-condensation)  
(Slightly variable depending on ambient conditions for installation.)  
Dimensions (W x H x D)  
[without stand]  
1071 mm (42 1/4") x 725 mm (28 5/8") x 275 mm (10 7/8")  
[1071 mm (42 1/4") x 680 mm (26 7/8") x 74.5 mm (3")]  
Weights  
[without stand]  
26.9 kg (59.18 lbs)  
[22.9 kg (50.38 lbs)]  
Accessories  
(See “Check accessories”, P. 9)  
PAL, SECAM, NTSC 3.58/4.43 MHz  
16:9 (Wide format)  
Color systems  
Aspect ratio  
LCD panel type  
Effective screen size (W x H)  
46 inch wide, active matrix TFT  
1018 mm (41") x 573 mm (23")  
Number of pixels displayed (panel) 1920 (H) x 1080 (V)  
Number of colors displayed  
Contrast ratio (typ.)  
16.7 million  
2000:1  
 
26  
   
Specifications  
27  
Terminals / Connectors  
Terminal type Signal type (IN)  
Terminal name  
Signal type (OUT)  
Composite video,  
Analog component  
VIDEO-1  
RCA connectors x 6  
480/60i, 576/50i, 480/60p, 576/50p,  
720/60p, 720/50p, 1080/60i, 1080/50i  
Audio L / R  
VIDEO-2  
HDMI-1  
RCA connectors x 3  
S-VIDEO connector x 1  
Composite video, S-Video, Audio L / R  
HDMI  
480/60i, 576/50i, 480/60p, 576/50p,  
720/60p, 720/50p, 1080/60i, 1080/50i,  
1080/60p, 1080/50p, 1080/24p  
Input terminals  
HDMI-2  
HDMI-3  
HDMI connector x 1  
HDMI-1 (DVI  
RCA connectors x 2  
D-SUB (15 pins) x 1  
Audio L / R  
ANALOG AUDIO)  
Analog PC signal  
VGA/60, XGA/60  
PC INPUT  
Stereo mini-jack x 1 (3.5 mm in  
diameter)  
PC AUDIO  
OUTPUT  
Audio L / R  
RCA connectors x 3  
Composite video, Audio L / R  
Headphone output  
Output terminals  
Stereo mini-jack x 1 (3.5 mm in  
diameter)  
Headphone  
z We may change the design and specifications without notice.  
 
   
Unit: mm (inch)  
Dimensions  
<Front view>  
<Side view>  
<Rear view>  
74.5 (3)  
VESA mounting holes  
(Size: 4-M6,  
depth: 15 mm)  
1071 (42 1/4)  
39.5 (1 5/8)  
400 (15 3/4)  
450 (17 3/4)  
275 (10 7/8)  
Note  
z The adjustable angle of the monitor screen from side to side is 20 degrees.  
 
28  
 
 
© 2009 Victor Company of Japan, Limited  
0509SKH-SW-MT  
 

Invacare Camping Equipment ACT Mattress User Manual
JBL Car Amplifier A3000GTi User Manual
Joovy Stroller 40X Series User Manual
JVC Camcorder GR AXM205 User Manual
JVC VCR LPT0678 001A User Manual
Kathrein Satellite TV System UFD 574 S User Manual
Keys Fitness Elliptical Trainer ST 45 User Manual
KitchenAid Dishwasher KUDU03STBL3 User Manual
Kramer Electronics Projector VP 725XLA User Manual
Kramer Electronics Video Gaming Accessories VP 419xl User Manual